Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handle on a Lancia Y

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Handle

This video illustrates how to replace the door handles on a Lancia Y. As the first step, remove all the screws using a star screwdriver so that the old handle can be disassembled. Next, you must also remove the handle lock, which is essential for safety but may not be present on all cars. Once these parts are removed, you can replace them with new ones. Proceed to install a new handle lock, which will be attached to the car door with screws. It is usually advisable to apply silicone to prevent water ingress in case of rain.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle of a Lancia Ypsilon
How to Remove the Handle of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Do you want to replace the left external handle (driver's side) of a Lancia Ypsilon? In this video, we briefly see how to remove the handle from the …
How to Replace the Outer Handle on a Lancia Ypsilon
How to Replace the Outer Handle on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Do you want to replace the outer handle (right) on the passenger side of a Lancia Ypsilon? In this detailed video, we will briefly see how to remove …
How to remove the external door handles on a Lancia Ypsilon
How to remove the external door handles on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To remove the external door handles on your Lancia Ypsilon, you can follow these steps. Keep in mind that the instructions may vary depending on the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos