Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to open and close the fuel cap of the Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Ypsilon 3, Y3, 846, MK 3 - Years 2011-2023
Part: Bodywork
Operation: How to open and close the fuel cap of the Lancia Ypsilon

In this video tutorial you can see how you can open the fuel cap of the Lancia Ypsilon, following a few simple steps that will help you better manage your car. First you have to open the fuel flap with one hand; subsequently, always using one hand, unscrew the fuel cap counterclockwise, if necessary, refuel your car. To close the cap, just take the cap with one hand and insert it into the slot and turn it clockwise to close the cap. Then screw the small cap on top of the fuel cap as well. Now close the fuel door and that's it.


Posted on 21 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2003-2011 - What to do if the door pull of the Lancia Ypsilon makes a noise? Read Answer
    • Ypsilon 2003-2011 - Why doesn't the boot of the Lancia Ypsilon open? Read Answer
    • Ypsilon 2003-2011 - Why does the Lancia Ypsilon's tailgate no longer close? Read Answer
    • Ypsilon 2011-2023 - Where does the Lancia Ypsilon's front hood open from? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos