Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Range Rover Badge

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Manufacturer emblem

See other generations:
Video tutorial

Today, we will explain how to replace the Range Rover badge. To perform this simple operation, you need a heat gun, a grinder, some solvent, masking tape, and a spatula.

Heat the letters on the rear bumper using the heat gun. When the surface is warm enough, use the spatula to remove the letters. Use the grinder to smooth the area and remove any excess adhesive that the solvent couldn't eliminate.

Apply masking tape to outline guidelines that will help you align the letters straight. After attaching the new letters to the bumper, wait for the adhesive to dry before exposing the vehicle to external elements.


Posted on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
Where to Find the Fuse Box of the Range Rover
Where to Find the Fuse Box of the Range Rover
Land Rover Range Rover (2012-2021 / MK 2) In this mini guide, discover the steps to locate the main fuse box of your Range Rover independently. These steps are simple and accessible to everyo…
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos