Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Land Rover Discovery

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on most Land Rover vehicles (including the Discovery III). Turn on the ignition without starting the engine, open the hood and the driver's door (this tells the system that you are performing a workshop operation); then press the brake pedal and the accelerator pedal simultaneously and firmly.

Keep both pedals pressed for at least 60 seconds, then turn off the ignition.

Turn the ignition back on after a few seconds and check if the service light has turned off. If it is still on, repeat the entire procedure. This method may not work for models from 2018 onwards (but it's still worth a try).


Posted on 4 November 2026 by ScegliAuto


Related tutorials

Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
…
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) In today's video, learn how to reset the oil and AdBlue warning lights in the Land Rover Discovery Sport. First, perform the maintenance recommended …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos