Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Stop Light on Land Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

Let's look at removing the bulbs from the taillights on a Land Rover Sport. Lift the trunk of the vehicle and locate the taillight assemblies.

Remove the retaining screws located on the side of the light: disconnect the taillight from its housing once all screws are removed (disconnect the power connectors). Replace the damaged bulbs with new ones (same size and voltage).

Finally, reinstall the taillight and reconnect the power connectors: tighten the retaining screws on the side of the lights. Turn on the headlights and check their operation.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Land Rover Range Rover Sport?
Where are the fuses located in the Land Rover Range Rover Sport?
Land Rover Range Rover (2002-2012 / L322, MK 3) The fuses in the Land Rover Range Rover Sport are located inside dedicated fuse boxes on the vehicle: this type of vehicle has two fuse boxes. The fi…
How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) To replace the cabin filter in the Land Rover Range Rover Sport, press the designated button on the dashboard to open the glove compartment on the pa…
How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos