Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Power Steering Oil Change on Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Power steering fluid

See other generations:
Video tutorial

It is recommended to buy Land Rover branded power steering oil as advised by the manufacturer. To extract the old oil, the procedure is very simple: lift the bonnet and place the support rod. Locate the container for the fluid, which is the cylindrical one with a black and yellow cap (see video).

Unscrew the cap of the container and extract the fluid from the top using a large syringe and a tube. If the syringe cannot hold all the oil present, pour it into a separate container and repeat the extraction.

Fill the power steering fluid container (not to the brim) and you're done.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacement of the engine oil and oil filter of the Land Rover Freelander TD4.
Replacement of the engine oil and oil filter of the Land Rover Freelander TD4.
Land Rover Freelander (1997-2006 / Freelander 1) These short and simple instructions will show us how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the La…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Where is the OBD port on the Land Rover Freelander?
Where is the OBD port on the Land Rover Freelander?
Land Rover Freelander (1997-2006 / Freelander 1) If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, read this guide and follow the few simple steps …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos