Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Land Rover Key Battery

Model: Land Rover Land-rover Various
Part: Key

Your Land Rover remote has a small grey cover on the side: remove it by pushing in the direction indicated by the arrow. Once done, you can extract the manual key from the same casing and use it as a tool to open the remote (otherwise, use a small flathead screwdriver): lever as shown in the video in the slot of the casing, splitting it into two halves. Now you will find the CR2032 battery, which you can easily remove by hand and replace with the new one you purchased (available at any hardware store). Good luck!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery in the Land Rover key?
How do you replace the battery in the Land Rover key?
Land Rover Land-rover Various The replacement of the key battery for a Land Rover, as shown in this support video, follows a standard procedure across the various models produced …
How to change the battery of a Land Rover key
How to change the battery of a Land Rover key
Land Rover Land-rover Various In today's video, we will see the entire step-by-step procedure to replace the battery of a latest generation Land Rover vehicle key. We will start b…
How to Replace the Remote Battery in a Land Rover?
How to Replace the Remote Battery in a Land Rover?
Land Rover Land-rover Various In this tutorial, see how to replace the battery in a Land Rover remote, an extremely simple and quick operation. For this, you will need a replaceme…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos