Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulbs on a Land Rover Discovery 2

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Instrument panel light

See other generations:
Video tutorial

In this short video, learn how to replace the climate control bulbs on a second-generation Land Rover Discovery in simple steps. First, get inside the vehicle and use a thin tool to remove the climate control panel, as shown in the video.

Then, disconnect the electrical connector located on the back. Next, use a screwdriver to remove the screws from the cover on the back to access the bulbs.

Finally, remove the old bulbs and replace them with new ones, following the reverse procedure of disassembly!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to disassemble the central part of the dashboard of the Land Rover Discovery
How to disassemble the central part of the dashboard of the Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) The following steps will show us the procedure for disassembling and replacing the central part of the dashboard of the Land Rover Discovery. First, …
Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos