Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Boot on Land Rover Discovery 1

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004

See other generations:
Video tutorial

In this short and simple video, you will learn how to remove and replace the handbrake boot on the first-generation Land Rover Freelander, following the instructions provided below. First, get inside the vehicle and start by removing the boot from the handbrake; to do this, pull it outward to detach it completely from the handbrake lever, as shown in the video.

At this point, separate the two parts of the boot, replacing the cover; all that's left is to insert it onto the handbrake lever and secure it properly!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Disable the Electronic Parking Brake of the Land Rover Discovery?
How to Disable the Electronic Parking Brake of the Land Rover Discovery?
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) To disable the electronic parking brake of the Land Rover Discovery, you need to open the hood of the vehicle to access the underlying components. Ne…
How to Replace the Gear Shift Knob on a Land Rover Discovery?
How to Replace the Gear Shift Knob on a Land Rover Discovery?
Land Rover Discovery (2004-2010 / LR3, L319, Discovery 3, MK 3) To replace the gear shift knob on a Land Rover Discovery, lift the lower part of the boot, disengaging its securing clips to remove it from the cente…
How to Adjust the Handbrake on Discovery
How to Adjust the Handbrake on Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Do you want to remove the cover of the handbrake lever on a Land Rover Discovery? Let's see how to adjust the handbrake: using a plastic lever, remov…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos