Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Discovery

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

The service light is a simple reminder that alerts drivers to perform general maintenance on the vehicle after a certain number of miles. If you want to postpone this intervention or simply want to turn off the light easily, just follow these steps.

First, turn off the vehicle, then locate the small button at the bottom of the speedometer and hold it down. At the same time, turn on the ignition and release the button.

Immediately after, press it once, and as soon as a new message appears on the display, hold it down again for a few seconds. Repeat this process 2 to 3 times until you see the word "end". At this point, the reset is complete, and you can turn off the ignition.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
How to Reset the Service Light on a Land Rover Discovery?
How to Reset the Service Light on a Land Rover Discovery?
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) On the Land Rover Discovery, reset the Service light by pressing the accelerator and brake pedals simultaneously. Next, insert the ignition key into …
How to Reset the Service Light on a Land Rover Discovery?
How to Reset the Service Light on a Land Rover Discovery?
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) To reset the Service light on a Land Rover Discovery, press and hold the accelerator and brake pedals simultaneously. Next, insert the ignition key i…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos