Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : How to reset the service light on the Land Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: -board computer
Operation: How to reset the service light on the Land Rover Evoque

Below we will find out how to properly reset the service light of the Land Rover Evoque. Fortunately, it is a very simple, quick and above all within anyone's reach. All you have to do is read the following instructions carefully and put them into practice. First, turn on the car ignition and then enter the menu. Scroll down until you find "Service Menu" and press the "OK" button. Scroll once again to the last item and finally hold down the down arrow button and the button located at the end of the left lever. Release them after about 10 seconds and that's it.


Posted on 7 April 2024 by ScegliAuto



How do you reset the Land Rover Evoque Service light?
Land Rover Evoque (2011-2018 / MK 1, L538) The Land Rover Evoque Service warning light can be reset by going inside the passenger compartment and turning on the instrument panel, after inserti
How do you reset the Service light on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) On the Land Rover Evoque, it is possible to reset the Service light by turning on the instrument panel, inserting the appropriate ignition key, and p
To reset the service of a Land Rover Evoque.
Land Rover Evoque (2018-2024 / MK 2, L551) To reset the service light on a Land Rover Evoque without a diagnostic tool, after performing a service on your own, you need to follow a different p

    Frequently Asked Questions

    • Evoque 2018-2025 - What does the SOS limited functionality light mean on my Land Rover? Read Answer
    • Evoque 2018-2025 - What does the Range Rover Evoque tire warning light mean? Read Answer
    • Evoque 2018-2025 - What does "sos limited functionality" mean on Range Rover Evoque? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos