Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : How to replace the Land Rover Discovery key battery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 4, MK 4, LR4 - Years 2010-2016
Part: Key
Operation: How to replace the Land Rover Discovery key battery

To replace the battery in the key of your Land Rover Discovery (year 2010-2016) just put into practice the following steps. First, remove the physical emergency key completely and immediately use it to open the cover. At this point, identify the exhausted battery and remove it. Replace it with a new perfectly compatible battery (model CR2032) and replace the cover. Finally, insert the physical emergency key again inside the cover and you are done. All that remains is to personally test the correct functioning of the smart key.


Posted on 31 August 2022 by ScegliAuto



Battery removal in the Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery of a Land Rover Discovery? We open the hood and see the disassembly of the battery. We lift up the front hood, releasing the loc
How to replace the Land Rover Discovery remote control battery?
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery 5) In this tutorial we can see how to replace the Land Rover Discovery 5 remote control battery, an extremely simple and fast operation. To do this, we
How to replace the battery of a Land Rover Discovery 3.
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this new guide dedicated to your Land Rover Discovery Mk3, we will discover the various steps to quickly and safely replace the car battery. First

    Frequently Asked Questions

    • Discovery 2004-2010 - What to do if your Land Rover Discovery key doesn't work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos