Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Land Rover Range Rover?

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in a Land Rover Range Rover, a very simple operation. First, raise the hood completely by releasing the latches on both sides and securing it with the indicated support rods.

Once done, disconnect the various battery cables and remove the two long mounting bolts using a 10mm socket wrench. Finally, disconnect both terminals by loosening the two nuts with the 10mm wrench, remove the battery, and install the replacement by following the reverse procedure.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
How to Replace the Battery in a Land Rover Range Rover?
How to Replace the Battery in a Land Rover Range Rover?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the battery in a Land Rover Range Rover, lift the key to pry inside its housing: this will allow you to open the fob and access the compon…
How to Replace the Key Fob Battery on a Land Rover Range Rover?
How to Replace the Key Fob Battery on a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To replace the battery in the key fob of a Land Rover Range Rover, press the button on the side of the device to extract the key from the bottom. Onc…

    Frequently Asked Questions

    • Range Rover 2012-2021 - Where are the Range Rover Sport batteries located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos