Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : How to replace the battery of the Land Rover Range Rover remote control?

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 2 - Years 2012-2021
Part: Key
Operation: How to replace the battery of the Land Rover Range Rover remote control?

Replacing the battery of the Land Rover Range Rover remote control is an extremely simple and fast operation, let's see how to proceed in this tutorial. To do this, we will not need any particular tools, but only a replacement battery of type CR2032. First of all, we unclip the right metal cover by pushing it upwards, then we remove the emergency key, insert it into the indicated slot, and, using leverage, separate the two halves of the remote control. Once opened, we can remove the old battery and insert the replacement battery in the correct direction.


Posted on 4 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Range Rover 2012-2021 - When does the message "smart key not found" appear in the Land Rover Range Rover? Read Answer
    • Range Rover 2002-2012 - What to do if the Range Rover no longer recognizes your key? Read Answer
    • Range Rover 2012-2021 - Range Rover Sport does not detect the key: what to do? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos