Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Electric Windows on a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

This helpful video tutorial shows how to reset the electric windows on a Land Rover Freelander 2, produced from 2006 to 2016. The operation is very simple and can be done independently in just a few seconds. Start by raising the window button until the window reaches the top stop, then release it. Next, raise the button again and hold it for five seconds to reset it. Finally, repeat the same operation on all four windows of the vehicle.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Change the Turbocharger on the Land Rover Freelander 2.0
How to Change the Turbocharger on the Land Rover Freelander 2.0
Land Rover Freelander (2006-2016 / Freelander 2) In this tutorial, you will find the main instructions to disassemble and replace the turbocharger on the Land Rover Freelander 2 2.0. First, open the…
How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Replace the EGR Valve in a Land Rover Freelander 2
How to Replace the EGR Valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos