Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna in the Lexus RX?

Model: Lexus RX Xu30, MK 2 - Years 2003-2008
Part: Antenna

In this tutorial we can see how to replace the antenna in the Lexus RX, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and remove the upper interior gasket of the compartment. Next, unlock the cover of the right pillar and then the headliner, locate the antenna connector and disconnect it. At this point, all that remains is to unscrew the fixing nut with a 22mm socket wrench, remove the old antenna from the roof, insert the replacement and reassemble everything following the reverse procedure.

Posted on 9 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Lexus RX remote control
How to replace the battery of the Lexus RX remote control
Lexus RX (2016-2022 / MK 4, Al20) When the Lexus RX remote control stops working, it is necessary to replace the battery; the model of battery to purchase is CR 2032. To begin the rep…
How to Replace the Key Battery on a Lexus RX Mk2
How to Replace the Key Battery on a Lexus RX Mk2
Lexus RX (2003-2008 / Xu30, MK 2) To correctly replace the battery inside your Lexus RX Mk2 key (2003-2008), follow these steps. First, locate the small button on the key cover and pr…
How to reset the tire pressure light on a 2009 Lexus RX350
How to reset the tire pressure light on a 2009 Lexus RX350
Lexus RX (2008-2015 / MK 3, Al10) The tire pressure warning light on the instrument panel of your 2009 Lexus RX350 lights up when a puncture or incorrect inflation pressure is detecte…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos