Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the antenna of the Lexus IS?

Model: Lexus IS MK 3 - Years 2013-2024
Part: Antenna

To ensure the replacement of the antenna of the Lexus IS, you will need to pry with an object to detach the interior lining of the roof in the rear: once the lining is disconnected in this area, you will be able to locate the internal connectors that are connected to the antenna. You will need to disconnect them and then proceed to loosen the screws that secure it to its housing: once the screws have been removed, you will be able to detach the antenna from its seat and insert the new one to verify that everything is functioning properly.

Posted on 29 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb of the Lexus IS250
How to Replace the Front Headlamp Bulb of the Lexus IS250
Lexus IS (2005-2013 / MK 2) In this new mini guide dedicated to your Lexus IS250 second series (2011), we will discover how to replace the front headlamp bulb independently, wit…
How to replace the radio in a Lexus IS?
How to replace the radio in a Lexus IS?
Lexus IS (2005-2013 / MK 2) To replace the radio in a Lexus IS, use a tool to pry off the protective panel at the base of the centre console; underneath, you will find screws th…
How to Replace the Remote Control Battery on the Lexus IS 300?
How to Replace the Remote Control Battery on the Lexus IS 300?
Lexus IS (2005-2013 / MK 2) To replace the remote control battery on the Lexus IS 300, unscrew the small screw located immediately beneath the key. Once this screw is loosened, …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos