Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of iPhone, iPod, and AUX Devices

Model: Lexus IS MK 1 - Years 1998-2005
Part: Accessory kit

The following guide shows you how to easily install devices such as iPhone and iPod into your car's stereo system. These devices can be connected via the AUX input on the stereo, provided you have a minijack cable. Once you have the minijack, remove the stereo from its housing by pulling the panel and extracting it, ensuring the cable for connecting the devices comes out from underneath, in front of the gear lever, rather than from the glove compartment, making it much easier to use.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Radio Connection Kit with iPhone
Installation of Radio Connection Kit with iPhone
Lexus IS (2005-2013 / MK 2) Refer to the images to understand how to install the module that connects the iPhone to the car radio. If you have an automatic gearbox, first unscre…
Aftermarket Audio System Installation
Lexus IS (2013-2024 / MK 3) The audio system in modern cars can already be considered of good quality, especially if the manufacturer offers an upgrade option with solutions lik…
GPS Module Installation Instructions
Lexus IS (2013-2024 / MK 3) Installing the GPS module to integrate the satellite navigation system with the car radio is not particularly complex but mainly requires time and pa…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos