Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of iPhone, iPod, and AUX Kit

Model: Lexus SC - Years:
Part: Accessory kit

See other generations:
Video tutorial

This video shows you how to install an iPhone, iPod, and AUX interface kit. First, remove the small trim piece installed under pressure between the glove box and the gear lever, then extract the entire gear lever surround, also removing the attached connectors.

Next, proceed to extract the climate controls with the relevant display and connectors.

Remove the screws securing the car radio and proceed with its removal; once removed, locate the connector to attach your interface. Finally, check the correct operation of the interface kit and reinstall everything.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus SC (1991-2010 / ) Before proceeding with the removal of the car radio, it is advisable to pull the handbrake and shift the gear lever backwards to create more working …
Common Faults in the Lexus SC 430: Things to Know When Buying a Used One
Common Faults in the Lexus SC 430: Things to Know When Buying a Used One
Lexus SC (1991-2000 / Z30) This is an important guide for those looking to purchase a used Lexus SC430, detailing what to check. The most common issue is the engine light, caus…
How to replace the alternator of the Lexus SC 430
How to replace the alternator of the Lexus SC 430
Lexus SC (2001-2010 / Z40) Let's briefly go over the main instructions on how to disassemble and replace the alternator of the Lexus SC 430. First, we open the hood of the vehi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos