Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the Lexus ES350

Model: Lexus ES Xz10 - Years 2019-2025
Part: Fuse box

If you need to work on one or more fuses in your Lexus ES350 (XZ10) but cannot find them, do not worry as this guide provides all the information you need. Before proceeding, ensure the car is completely off and preferably with the battery disconnected. Next, enter the vehicle (driver's side) and reach the pedal area. Locate a small plastic box on the left side of the dashboard and remove the protective cover. Just behind it, you will finally have access to all the various fuses in the car.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Lexus ES350 remote control
How to replace the battery of the Lexus ES350 remote control
Lexus ES (2019-2025 / Xz10) To change the battery of your Lexus ES350 remote control, you must follow a procedure that is practically identical to that used for remote control m…
How do you reset the tire pressure light on the Lexus ES350?
How do you reset the tire pressure light on the Lexus ES350?
Lexus ES (2006-2012 / Xv40, ) In order to reset the tire pressure warning light of the Lexus ES350, first you need to inflate the tires, bringing them back to the recommended pres…
Where can I find the fuse box of the Lexus ES350?
Where can I find the fuse box of the Lexus ES350?
Lexus ES (2006-2012 / Xv40, ) The Lexus ES model produced from 2006 to 2012 has two fuse boxes inside. The first fuse box is located inside the engine compartment right next to th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos