Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Amplifier System Replacement

Model: Lexus LS MK 3, Xf30 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Accessory kit

See other generations:
Video tutorial

Among the various accessories found in our car is the audio system. The following guide shows how to replace it if necessary.

First, remove the panels covering the doors, taking care not to break the clips holding them in place, then carefully turn the screw located underneath. Once the panels are open and removed, detach the old speakers that are securely fixed, disconnect the wires, and remove the old speakers, proceeding to install the new chosen speakers.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Lexus LS (2000-2006 / MK 3, Xf30) The cabin air filter is located on the passenger side, behind the glove compartment: to replace it, open the glove compartment, remove the plastic co…
How to Replace the TPMS Sensor on a Lexus LS
How to Replace the TPMS Sensor on a Lexus LS
Lexus LS (2007-2017 / MK 4) Replacing the TPMS sensor for monitoring tyre pressure is a simple and quick operation that can be done independently on a Lexus LS vehicle. To repla…
How to Replace the Cabin Air Filter on the Lexus LS
How to Replace the Cabin Air Filter on the Lexus LS
Lexus LS (2007-2017 / MK 4) If you notice a significant reduction in airflow from the air conditioning, the cabin air filter is likely clogged and will need replacing. Follow th…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos