Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front door speaker of the Lexus SC

Model: Lexus SC Z40 - Years 2001-2010
Part: Speaker

Today we will see the instructions that will allow us to disassemble the door panel and replace the speaker of the Lexus SC. First, we open the front door and start disassembling and removing the trim, unscrewing all the fixing screws; we remove the window switch panel, levering on the sides to detach it and disconnecting the electrical connector underneath. Once the door panel is removed, we will unscrew the speaker screws, disconnecting the power connector; we replace the speaker with the new one and check its operation before reassembling the door panel.

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Lexus SC 430
How to Reset the Maintenance Light on the Lexus SC 430
Lexus SC (2001-2010 / Z40) In this mini guide for your 2009 Lexus SC 430, you will learn how to correctly perform the manual reset of the maintenance light that illuminates on …
How to Reset the Tyre Pressure Warning Light on the Lexus SC430?
How to Reset the Tyre Pressure Warning Light on the Lexus SC430?
Lexus SC (2001-2010 / Z40) To reset the tyre pressure warning light on the Lexus SC430, disconnect the connectors of the tyre pressure sensors. To do this, remove the cover whe…
How to replace the alternator of the Lexus SC 430
How to replace the alternator of the Lexus SC 430
Lexus SC (2001-2010 / Z40) Let's briefly go over the main instructions on how to disassemble and replace the alternator of the Lexus SC 430. First, we open the hood of the vehi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos