Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Lexus LS

Model: Lexus LS MK 4 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

If you notice a significant reduction in airflow from the air conditioning, the cabin air filter is likely clogged and will need replacing. Follow the instructions below.

Sit in the passenger seat and open the glove compartment. At the bottom of the compartment, you will find the area containing the filter.

Remove the cover by pulling it towards you, then extract the old filter and replace it with the new one. Close the cover and then shut the glove compartment, and you’re done.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How do you replace the cabin filter in a Lexus LS?
How do you replace the cabin filter in a Lexus LS?
Lexus LS (2007-2017 / MK 4) It will be possible to replace the cabin filter of the Lexus LS by opening the glove compartment located on the passenger side. Once it is opened, yo…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Lexus LS (2000-2006 / MK 3, Xf30) The cabin air filter is located on the passenger side, behind the glove compartment: to replace it, open the glove compartment, remove the plastic co…
How to Reset the Tyre Warning Light on the Lexus LS 430?
How to Reset the Tyre Warning Light on the Lexus LS 430?
Lexus LS (2007-2017 / MK 4) In this tutorial, you will see how to reset the tyre warning light on the Lexus LS 430, a very simple and quick operation to perform only after resto…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos