Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lexus
  4. :
  5. LS
  6. : How to reset the tire pressure light on the Lexus LS 430?

Lexus LS - Video tutorial

Model: Lexus LS MK 4 - Years 2012-2018
Part: Tires
Operation: How to reset the tire pressure light on the Lexus LS 430?

In this tutorial, we can see how to reset the tire pressure light in the Lexus LS 430, an extremely simple and quick operation, to be performed only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the passenger compartment, then insert the key and turn on the instrument panel. Next, locate the button with the inscription "SET" located below the dashboard, on the driver's side, and hold it down for the necessary time for the light to disappear from the display. Finally, restart the vehicle.


Posted on 17 March 2024 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos