Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat

Model: Lexus IS MK 3 - Years 2013-2024
Part: Thermostat

It is advisable to carry out this repair with the engine cold as you will be dealing with the engine coolant; start by draining the coolant from the radiator drain plug, disconnect the hose from the manifold where the thermostat is integrated, then remove the manifold and extract the old thermostat, applying the new one with the corresponding gasket; reassemble everything, refill the cooling system with the specific coolant to the required level, and start the engine until it reaches operating temperature, checking the opening of the new thermostat; recheck the coolant level and bleed any air if necessary.

Updated on 14 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Thermostat Replacement
Lexus IS (2013-2024 / MK 3) The thermostat regulates the exchange of hot engine coolant with cooler coolant from the radiator: at intervals determined by the temperature of the …
Instructions for Replacing Start&Stop Button
Lexus IS (2013-2024 / MK 3) Many cars are equipped with a button for starting and stopping the engine, and as an accessory, you can also choose the colour of this button; the vi…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Lexus IS (2005-2013 / MK 2) The cabin air filter for this car model is located inside the glove compartment, at the bottom. Access it from the passenger side, open the glove com…

Other guides you may be interested in

How to Remove the Spark Plugs from a Toyota Aygo

How to remove the spark plugs from a Toyota Aygo? In this video, we detail the procedure: Pull the engine bay release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Remove the engine soundproofing panel, then use a socket spanner to unscrew the securing pins of the coils. Grasp the coil and twist it to extract it from the cylinder head. Use a socket spanner and extension to unscrew the spark plugs (remove them from the cylinder head) and take the new spark plug, inserting it into the cylinder head with the socket spanner. Finally, reattach the plastic cover panel.

Watch the video!


by ScegliAuto

More videos