Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan on the Volkswagen Jetta 2.5

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Radiator

Today, we will discover the instructions to remove and replace the engine cooling radiator fan on the Volkswagen Jetta 2.5. First, open the bonnet of the vehicle and start by removing the upper engine cover; then disconnect the electrical connector of the fan and lift the vehicle to remove the lower cover, as shown in the video. At this point, unscrew the screws securing the fan to the radiator to remove it; perform the replacement and reassemble the fan, checking its operation.

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volkswagen Jetta?
Where are the fuses located in the Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) Every fuse of the Volkswagen Jetta is located inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of car it is p…
Where are the fuses located in the Volkswagen Jetta?
Where are the fuses located in the Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) Each of the fuses of the Volkswagen Jetta is located in one of the special fuse boxes that are installed on the vehicle: in this type of car it is po…
Where are the fuses located in the Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) On board the Volkswagen Jetta, the fuse boxes are responsible for containing the fuses that regulate the operation of the devices installed on the ve…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos