Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Warning Lights on the Centre Console

Model: Lexus RX Al10, MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
This video is currently unavailable

To replace one or more warning lights on the centre console, or to replace them with modern lights, simply follow the brief instructions in the following video. It is a straightforward job that does not require special tools or skills, accessible even to less experienced individuals.

First, unscrew and free the console. Locate the switches with the lights to be replaced and gently lever them out from their support, first from one side and then the other.

Once the switch is removed, identify the screw to loosen to remove the light. After you have pulled out the burnt bulb, insert the new one and reassemble the switch.

Ensure all lights illuminate before reassembling everything. Car model: LEXUS GS Tools required: small crosshead or flathead screwdriver.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Car Radio Removal Instructions
Car Radio Removal Instructions
Lexus RX (2008-2015 / Al10, MK 3) To remove the original car radio, you need to take out some elements of the centre console. First, move the gear lever back to create more working sp…
Installing LED Interior Lights
Installing LED Interior Lights
Lexus RX (2003-2008 / MK 2, Xu30) Replacing the original incandescent bulbs with LED ones will give the car a much more appealing look; many manufacturers already sell specific kits c…
How to Reset the Maintenance Light on Lexus RX
How to Reset the Maintenance Light on Lexus RX
Lexus RX (2008-2015 / Al10, MK 3) After performing the DIY service, get inside the vehicle, engage the handbrake, press the START button twice, then press the button on the left side …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos