|
Do it yourself
| |||
| ||||
Oil and Filter Change on Lexus ES300
Model: Lexus ES
Xz10
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025
This video is currently unavailable
To change the oil on a Lexus ES300, first lift the vehicle safely using a jack, rather than relying solely on the scissor jack. Remove the inspection plug located in the lower casing of the vehicle, secured by 4 screws. Using a 14 mm spanner, remove the plug from the oil sump and allow the oil to drain into a suitable container, which you will dispose of at an authorised centre. Next to the oil sump, you will see the filter, which you should remove with the appropriate tool. The filter will also release some oil; collect this in the same container as the oil from the sump. Refit the new filter in place. Replace the sump plug, ensuring you have changed the gasket for safety. Clean any oil residue and replace the inspection plug in the casing. Now it’s time to refill the oil from the top with 4.8 litres (including the filter) of synthetic oil SAE 0W16. Run the engine at low revs to circulate the oil. To reset the warning light, go to Menu Settings; Vehicle Settings, press OK; navigate to "oil maintenance"; confirm when prompted to "reset data". You can then switch off the ignition. The oil change kit costs about £100 on major e-commerce sites.
Updated on 6 August 2026 by ScegliAuto
Related tutorials
Lexus ES
(2019-2025 /
Xz10)
Replacing the battery in your car's smart key is undoubtedly one of the simplest maintenance tasks you can do independently. This also applies to the…
Lexus ES
(2019-2025 /
Xz10)
In a few simple steps, we will see how to replace the engine air filter of the Lexus ES 3.5 V6. First, open the hood of the car and start by unclippi…
Lexus ES
(2019-2025 /
Xz10)
In this video tutorial, see how to reset the oil life or maintenance light in a 2021 Lexus ES 350 by following some simple steps: the first thing to …
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |