Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Lexus ES350?

Model: Lexus ES , Xv40 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on a Lexus ES350, first inflate the tyres to the recommended pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once all the tyres have been inflated, press and hold the button marked SET located on the dashboard below the steering column: continue to hold the button for a few seconds, and the tyre pressure warning light will turn off, allowing you to switch off the ignition.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to replace the key battery in the Lexus ES350
How to replace the key battery in the Lexus ES350
Lexus ES (2019-2025 / Xz10) In this guide dedicated to your Lexus ES350 (2019-2023), discover how to replace the battery located inside the smart key. First, pull out the emerge…
How to Reset the Maintenance Light on the 2021 Lexus ES350
How to Reset the Maintenance Light on the 2021 Lexus ES350
Lexus ES (2019-2025 / Xz10) In this guide, we will describe all the steps necessary to manually reset the maintenance light on your 2021 Lexus ES350. First, insert the key and t…
How to replace the battery of the Lexus ES350 remote control
How to replace the battery of the Lexus ES350 remote control
Lexus ES (2019-2025 / Xz10) To change the battery of your Lexus ES350 remote control, you must follow a procedure that is practically identical to that used for remote control m…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos