Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Lincoln Aviator

Model: Lincoln Aviator MK 1 - Years: 2003, 2004, 2005
Part: Car stereo

See other generations:
Video tutorial

Today, you will learn how to remove the factory radio from a Lincoln Aviator by following the instructions below. First, get inside the vehicle and grab a thin plastic trim tool.

Then, remove the air vent cover located at the top of the dashboard, and unscrew the screws for the radio found underneath, as shown in the video. At this point, take off the plastic cover of the radio, then remove the air vents; finally, remove the radio by disconnecting the connectors located at the back!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Lincoln Aviator
Removing the Door Panel of the Lincoln Aviator
Lincoln Aviator (2003-2005 / MK 1) In today's video, you will see the steps to remove and replace the front door panel of the Lincoln Aviator, following the instructions below. First, …
How to Replace the Radio in a Lincoln Aviator
How to Replace the Radio in a Lincoln Aviator
Lincoln Aviator (2003-2005 / MK 1) In today's video, you will see the steps necessary to remove and replace the radio in a Lincoln Aviator. First, get inside the vehicle and start by r…
Where Are the Fuses on the Lincoln Aviator?
Where Are the Fuses on the Lincoln Aviator?
Lincoln Aviator (2003-2005 / MK 1) The Lincoln Aviator has two fuse boxes, and like most vehicles, one is located under the hood while the other is inside the cabin. The latter is foun…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos