Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Aviator
    4. : Lincoln Aviator door panel removal

Lincoln Aviator - Video tutorial

Model: Lincoln Aviator MK 1 - Years 2003-2005
Part: Door panel
Operation: Lincoln Aviator door panel removal

In today's video we will see the steps on how to disassemble and replace the Lincoln Aviator front door panel, following the instructions below. First of all, open the front hatch and remove the plastic parts located on the door panel, as well as that of the grab handle and that of the window regulator button; we then remove the latter, disconnecting the electrical connectors that we find below, as illustrated in the video. Now we unscrew the screws located on the panel, detaching and removing it, applying the reverse procedure for reassembly!


Posted on 11 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos