Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Linhai
    3. : Linhai 500

How to Change the Engine Oil in a Linhai 500 Quad

Model: Linhai Linhai 500
Part: Engine oil

Video tutorial

In this tutorial, we will see how to change the engine oil in a Linhai 500 quad, a very simple and quick operation. First, ensure that the engine is cool enough, then remove both the left panel and the lower fairing on the same side.

Next, position a container under the engine, locate the drain hole bolt, and unscrew it using a socket spanner. At this point, wait for all the oil in the system to drain out, replace the filter, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 8 August 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on the Linhai Promax 500
Change the Engine Oil and Oil Filter on the Linhai Promax 500
Promax 500 Today, we will go through the main steps to carry out the routine maintenance service by changing the engine oil and oil filter on the Linhai Promax …
How to Grease a Linhai Dragonfly 400 Quad
How to Grease a Linhai Dragonfly 400 Quad
Dragonfly 400 Using a suitable grease gun, attach your preferred nozzle and obtain marine grease. Place some grease into the grease gun cylinder using a small dish…
How to Change the Differential Oil on a Linhai Promax 500
How to Change the Differential Oil on a Linhai Promax 500
Promax 500 In today's tutorial, we will see how to replace the transmission oil on the Linhai Promax 500 in simple and quick steps. First, lift the vehicle and …

How to Change the Engine Oil of an Aprilia Dorsoduro 750?

Changing the engine oil of an Aprilia Dorsoduro 750 requires attention and precision to ensure the engine functions correctly. First, ensure the bike is on a flat and stable surface, preferably using a centre stand or suitable support. The engine should be slightly warm to allow the oil to flow better, so start it for a few minutes and then turn it off. Locate the oil drain plug at the bottom of the engine and position a container to collect the old oil. Unscrew the plug using an appropriate spanner and let the oil drain completely. In the meantime, remove the filler cap to aid the flow. Once drained, replace the drain plug gasket if necessary, then screw it back on tightly. Proceed to pour in the new oil using a funnel to avoid spills, ensuring you adhere to the quantity and specification stated in the bike's manual. After filling, start the engine for a few minutes and check the level with the dipstick or indicator. Adjust if necessary and dispose of the used oil following local regulations.

Watch the video!


by ScegliAuto

More videos