Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Linhai
    3. : Dragonfly 400

How to Grease a Linhai Dragonfly 400 Quad

Model: Linhai Dragonfly 400
Part: Accelerator

Video tutorial

Using a suitable grease gun, attach your preferred nozzle and obtain marine grease. Place some grease into the grease gun cylinder using a small dish and grease all wear areas of the quad, such as the suspension parts, until grease comes out of the side bushings.

At this point, it means there is no more space in the component you are greasing, so you can stop. Do not perform this task without the proper tools as it would be ineffective.

Remember that a quad used off-road has a very short wear time, so grease it often.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Linhai 500 Quad
How to Change the Engine Oil in a Linhai 500 Quad
Linhai 500 In this tutorial, we will see how to change the engine oil in a Linhai 500 quad, a very simple and quick operation. First, ensure that the engine is …
How to Change the Differential Oil on a Linhai Promax 500
How to Change the Differential Oil on a Linhai Promax 500
Promax 500 In today's tutorial, we will see how to replace the transmission oil on the Linhai Promax 500 in simple and quick steps. First, lift the vehicle and …
How to Replace the Air Filter on a Linhai 300?
How to Replace the Air Filter on a Linhai 300?
300 Cc The air filter on the Linhai 300 is located under the seat, which must be removed by loosening the relevant fixing screws. The filter is covered by a…

How to Change the Engine Oil of an Aprilia Dorsoduro 750?

Changing the engine oil of an Aprilia Dorsoduro 750 requires attention and precision to ensure the engine functions correctly. First, ensure the bike is on a flat and stable surface, preferably using a centre stand or suitable support. The engine should be slightly warm to allow the oil to flow better, so start it for a few minutes and then turn it off. Locate the oil drain plug at the bottom of the engine and position a container to collect the old oil. Unscrew the plug using an appropriate spanner and let the oil drain completely. In the meantime, remove the filler cap to aid the flow. Once drained, replace the drain plug gasket if necessary, then screw it back on tightly. Proceed to pour in the new oil using a funnel to avoid spills, ensuring you adhere to the quantity and specification stated in the bike's manual. After filling, start the engine for a few minutes and check the level with the dipstick or indicator. Adjust if necessary and dispose of the used oil following local regulations.

Watch the video!


by ScegliAuto

More videos