Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cylinder Head from the LML Star 200 Engine?

Model: Lml Star 200
Part: Cylinder head

Video tutorial

To remove the cylinder head from the LML Star 200 engine, you will need to loosen the bolts that secure the engine block to its housing at the rear of the frame. Once the engine is freed, proceed to disconnect the coil from the top of the cylinder and also loosen the bolts of the valve cover.

This will allow the head to be freed from the bolts securing it to the top of the engine. Now you can detach it to insert the new one and remount the engine block in its place.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How to remove the cylinder head of the LML Star 200 engine?
How to remove the cylinder head of the LML Star 200 engine?
Star 200 To remove the cylinder head of the LML Star 200 engine, first, pull the engine block out of its housing to gain more working space. Then, detach the …
Guide to Removing the Engine Block of the LML Star 200
Guide to Removing the Engine Block of the LML Star 200
Star 200 In this brief and simple guide, you will find instructions to remove and open the engine block of the LML Star 200, as well as the Piaggio Vespa PX 2…
How to Remove the Camshaft Inspection Cover of the LML Star 200
How to Remove the Camshaft Inspection Cover of the LML Star 200
Star 200 These brief and simple steps will show you how to disassemble and remove the clutch cover of the LML Star 200. In this specific case, the camshaft in…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos