Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Lotus Exige?

Model: Lotus Exige MK 2 - Years 2004-2012
Part: Rear bumper

Lucky owners of the Lotus Exige who need to remove the rear bumper, whether to renew the paint, replace it, or customise it aesthetically, will find clear instructions in this video tutorial. Start by removing the hard top, then the roll bar, and all the bolts located at the bottom of the bumper. Disconnect the vehicle's power battery for safety, remove the fuel cap, the rear speakers, and everything else shown in the aforementioned video. The estimated time to complete the job is two hours.

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Lotus Exige?
How to Change the Engine Oil in the Lotus Exige?
Lotus Exige (2004-2012 / MK 2) In this tutorial, you will see how to change the engine oil in the Lotus Exige, a very simple and quick operation to be performed every 12 months. Fi…
How to Replace the Headlight Bulb on the Lotus Exige
How to Replace the Headlight Bulb on the Lotus Exige
Lotus Exige (2004-2012 / MK 2) Here are step-by-step instructions to remove and replace the headlight bulbs on the Lotus Exige, as well as the Elise. First, remove the wheel arch l…
How to Enter a Lotus Exige
How to Enter a Lotus Exige
Lotus Exige (2004-2012 / MK 2) This guide explains how to enter a Lotus Exige, based on the entertaining demonstration in the video: it is a two-step process that requires coordina…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos