Do it yourself
| ||||
|
Lotus Exige - Video tutorial
Model: Lotus Exige
MK 2
- Years 2004-2012 Shortly, we will see the step-by-step instructions that will allow us to disassemble and replace the front headlight bulbs of the Lotus Exige, but also of the Elise. First of all, let's remove and take off the wheel arch, unscrewing the fixing screws; then we remove the headlight fixture, thus accessing the bulbs, as shown in the video. At this point, disconnect the electrical connector of the bulb and replace it with the new one, of the correct type and with the same attachment; then reassemble the headlight fixture and finally the wheel arch, fixing it perfectly with the screws!
Posted on 26 March 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |