Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb on the Lotus Elise?

Model: Lotus Elise MK 2 - Years 2004-2009
Part: Headlight bulb

To replace the front headlight bulb on the Lotus Elise, loosen the screws securing the front wheel corresponding to the bulb to be replaced. Once the wheel is removed, loosen the screws securing the inner wheel arch lining. This will allow you to loosen the screws holding the headlight in place, completely removing it and disconnecting the connectors inside. After removal, you can pull out the bulb, replace it with a new one, and reassemble all previously removed components.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Lotus Elise
How to Replace the Front Headlamp Bulb on a Lotus Elise
Lotus Elise (2004-2009 / MK 2) Today, you will learn how to independently replace the front headlamp bulbs on a Lotus Elise. The bulb type we will use is an H1, 12-volt, 55-watt bu…
How to Replace the Engine Oil in a Lotus Elise?
How to Replace the Engine Oil in a Lotus Elise?
Lotus Elise (2004-2009 / MK 2) In this tutorial, see how to replace the engine oil in a Lotus Elise, a very simple and quick operation. First, lift the vehicle, taking all necessar…
How to replace the engine oil and oil filter of the Lotus Elise
How to replace the engine oil and oil filter of the Lotus Elise
Lotus Elise (2004-2009 / MK 2) Today we will see the steps on how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Lotus Elise. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos