Do it yourself
Frequently asked questions about cars and motorcycles

How to replace engine oil on Mahindra Kuv100

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Engine oil

If we want to replace the engine oil on this car independently, we can follow the instructions given in the video and in the description below. First open the bonnet and lift the car, under the engine there is a plastic carter that we must remove and under it we will find the oil pan and the drain plug. Take a container to place on the ground to collect the used oil and proceed to unscrew the cap. Wait a few minutes for all the oil to come out and screw the drain plug back on. Then go back to the upper part of the engine and proceed to fill the system with new oil having always in any case checked that the specifications of the oil to be used are compatible with those foreseen by the manufacturer. Lastly, close the filler cap and check the level with the appropriate dipstick.


Posted on 8 September 2024 by ScegliAuto



How to replace the diesel filter in the Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) In this tutorial, we can see how to replace the diesel filter in the Mahindra KUV100, a very simple and quick operation. First of all, make sure that
How to replace the battery in Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) In this tutorial we can see how to replace the battery in the Mahindra KUV100, a very simple and fast operation. First of all, let's make sure that t
How do you replace the battery of the Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) In order to replace the battery of the Mahindra KUV100, you need to open the hood so that you can locate the device on the right side of the engine c

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos