Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : Cabin air filter

Mahindra Xuv500 - Cabin air filter

Mahindra Xuv500 (2011-2018 / MK 1)
How to replace the Mahindra XUV 500 cabin air filter
The air filter in the cabin of your Mahindra XUV 500 plays a central role in maintaining the optimum quality of breathed air when using the air conditioning. …read all…
Posted on 25 May 2023 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to replace the cabin filter in Mahindra XUV500?
In this tutorial we can see how to replace the cabin filter in the Mahindra XUV500, an extremely simple and fast operation. First of all let's position …read all…
Posted on 28 November 2022 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to remove the cabin filter in the Mahindra XUV500?
In this tutorial we can see how to remove the cabin air filter in the Mahindra XUV500, so that you can proceed with cleaning or complete replacement. First of …read all…
Posted on 25 May 2022 by ScegliAuto
Airbags (1) Battery (3) Key (11) Checks and maintenance (5) Cabin air filter (3) Headlight bulb (2) Handle (2) Engine oil (1) Brake pads (1) Gear Shift Knob (1) Wheel (1) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos