Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mahindra Xuv500 - Handle

Mahindra Xuv500 (2011-2018 / MK 1)
How do you replace the outside door handle on your Mahindra Xuv500?
In order to replace the external handle of the Mahindra Xuv500 it is necessary to completely detach the corresponding door panel: this can be detached by …read all…
Posted on 1 May 2023 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to replace interior door handle on Mahindra XUV500
If you need to replace the internal handle of a door on Mahindra XUV500, even if only for aesthetic reasons as it is worn and damaged, just proceed as follows. …read all…
Posted on 25 April 2023 by ScegliAuto
Airbags (1) Battery (3) Key (11) Checks and maintenance (5) Cabin air filter (3) Headlight bulb (2) Handle (2) Engine oil (1) Brake pads (1) Gear Shift Knob (1) Wheel (1) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos