Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : Checks and maintenance

Mahindra Xuv500 - Checks and maintenance

Mahindra Xuv500 (2011-2018 / MK 1)
How do you reset the Service light on the Mahindra XUV500?
To reset the Service light on the Mahindra XUV500, you need to hold down the button located on the rear side of the instrument panel. You should keep holding …read all…
Posted on 17 January 2024 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to reset service in Mahindra XUV500?
In this tutorial we can see how to reset the service in the Mahindra XUV500, an extremely simple and fast operation. Before doing this, make sure you have …read all…
Posted on 17 May 2023 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to reset the service light on the Mahindra XUV500 display
We see in this guide the procedure that will allow us to reset the oil change routine maintenance warning light, which appears on the central display, of the …read all…
Posted on 30 October 2022 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to reset the Mahindra XUV 500 service
Let's find out in this guide the procedure that will allow us to reset the service light of the ordinary maintenance of the Mahindra XUV 500 oil change. First …read all…
Posted on 14 October 2022 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to disassemble the center console of the Mahindra XUV500?
In this tutorial we can see how to disassemble the center console in the Mahindra XUV500, a very simple and fast operation. To do this, we will only need a …read all…
Posted on 13 August 2022 by ScegliAuto
Airbags (1) Battery (3) Key (11) Checks and maintenance (5) Cabin air filter (3) Headlight bulb (2) Handle (2) Engine oil (1) Brake pads (1) Gear Shift Knob (1) Wheel (1) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos