Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : Windscreen wipers

Mahindra Xuv500 - Windscreen wipers

Mahindra Xuv500 (2011-2018 / MK 1)
How to replace the front wipers on the Mahindra Xuv500
Let's see in this guide how to remove and replace the front wipers of the Mahindra Xuv500. First, let's move to the front of our car and start raising the …read all…
Posted on 30 April 2024 by ScegliAuto
Airbags (1) Battery (3) Key (11) Checks and maintenance (5) Cabin air filter (3) Headlight bulb (2) Handle (2) Engine oil (1) Brake pads (1) Gear Shift Knob (1) Wheel (1) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos