Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : Battery

Mahindra Xuv500 - Battery

Mahindra Xuv500 (2011-2018 / MK 1)
Replacement of the battery and casing of the Mahindra Xuv500 remote control.
Today's main instructions will show us how to disassemble and replace the battery and shell of the Mahindra Xuv500 key remote. First, we take our remote and …read all…
Posted on 7 January 2024 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to replace the battery in Mahindra XUV500?
In this tutorial we can see how to replace the battery in the Mahindra XUV500, a very simple operation. Before starting, let's make sure that the key is not …read all…
Posted on 26 May 2023 by ScegliAuto
Mahindra Xuv500 (2011-2018 / MK 1)
How to replace the battery on the Mahindra Xuv500
Do we want to proceed in DIY mode to replace the battery on this car model? We read the instructions that are reported below and also take a look at the images …read all…
Posted on 5 August 2022 by ScegliAuto
Airbags (1) Battery (3) Key (11) Checks and maintenance (5) Cabin air filter (3) Headlight bulb (2) Handle (2) Engine oil (1) Brake pads (1) Gear Shift Knob (1) Wheel (1) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos