Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Malaguti Drakon?

Model: Malaguti Drakon
Part: Engine

Video tutorial

In order to disassemble the engine of the Malaguti Drakon, you need to loosen the screws that fix the block to its housing in the center of the frame: once the fixing screws of the supports have been unscrewed, you can proceed by disconnecting the pipes and disconnecting the connectors.

This way, the engine block can be opened by unscrewing the screws that fix the cylinder to the top: this can then be removed by disconnecting the piston from the connecting rod and thus also removing the connecting rod from the engine shaft.

This and other components can eventually be replaced, and finally closing the engine.


Posted on 21 June 2025 by ScegliAuto


Related tutorials

How to remove the engine from a Malaguti Phantom F12 100?
How to remove the engine from a Malaguti Phantom F12 100?
Phantom F12 125 To remove the engine from a Malaguti Phantom F12 125, you need to completely detach the engine block from its housing by loosening the screws that se…
How to Remove the Engine from a Malaguti Grizzly
How to Remove the Engine from a Malaguti Grizzly
Grizzly To remove the engine block from the frame of the Malaguti Grizzly, first disconnect the carburettor attached to it, along with the other cables, and …
How do you disassemble the engine of the Malaguti Firefox F15?
How do you disassemble the engine of the Malaguti Firefox F15?
Firefox F15 In order to disassemble the engine of the Malaguti Firefox F15, you need to loosen the screws that hold it to its housing in the center of the frame:…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos