Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Malaguti Fifty Top
Part: Engine

You can dismantle the engine of the Malaguti Fifty by loosening the screws that secure the part to its housing in the centre of the frame: you will need to unscrew the screws that secure the engine supports and the related intake manifolds. Once the connectors are disconnected, proceed to remove the screws that secure the cylinder to the top of the engine, then remove the piston inside; at this point, you can remove the additional internal components, allowing you to seal the engine block and check that everything is functioning.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Malaguti Fifty?
How do you disassemble the engine of the Malaguti Fifty?
Fifty Top In order to disassemble the engine of the Malaguti Fifty, you need to loosen the screws that fix the block to its housing in the center of the frame:…
How do you disassemble the engine of the Malaguti Fifty?
How do you disassemble the engine of the Malaguti Fifty?
Fifty Top To disassemble the Malaguti Fifty engine, you need to loosen the screws that fix the block to its housing in the center of the frame, so that it can …
How to Remove the Engine Block of the Malaguti Fifty Top
How to Remove the Engine Block of the Malaguti Fifty Top
Fifty Top Below are the steps to remove the entire engine block from the frame of the Malaguti Fifty Top, following the instructions provided. First, place the…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos