Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Malaguti
    3. : Blog 125
To replace the fuel pump on the Malaguti Blog 125, open the seat and loosen the screws that secure the under-seat compartment. The screws are located in the positions shown in the video; once all screws are loosened, you can remove the under-seat compartment and disconnect the relevant connectors. At this point, you can also extract the pump from its housing by disconnecting the connectors and removing the plastic locking ring. Once the old pump has been removed from its housing, it can be replaced with a new spare part.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from the Malaguti Blog 125?
How to Remove the Instrument Cluster from the Malaguti Blog 125?
Blog 125 To remove the instrument cluster from the Malaguti Blog 125, loosen the screws securing the windscreen and remove it. Once the windscreen is removed,…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos