Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to disassemble the engine of the Malaguti Phantom F12 125, you need to loosen the screws that secure the cylinder to the top of the engine block, so that it can be completely removed; after the cylinder has been removed, you will be able to locate the piston inside it, which must be detached from the connecting rod. The connecting rod must then be removed from the engine crankshaft, so that the latter and other components can be replaced if necessary. After the replacement, you can reassemble the engine block and install it back into its housing.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Engine of the Malaguti Phantom F12 125
How to Dismantle the Engine of the Malaguti Phantom F12 125
Phantom F12 125 You can dismantle the engine of the Malaguti Phantom F12 125 by loosening the screws that secure the block to its housing in the central lower part o…
How do you disassemble the engine of the Malaguti Phantom F12 125?
How do you disassemble the engine of the Malaguti Phantom F12 125?
Phantom F12 125 The disassembly operation of the engine of the Malaguti Phantom F12 125 can be carried out by completely removing the engine block from its housing, …
How to remove the engine from a Malaguti Phantom F12 100?
How to remove the engine from a Malaguti Phantom F12 100?
Phantom F12 125 To remove the engine from a Malaguti Phantom F12 125, you need to completely detach the engine block from its housing by loosening the screws that se…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos