Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Maruti Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Onboard computer

In the following article, we will explain the procedure for adjusting the time on the on-board computer of your Maruti Brezza. The procedure does not require any tools and takes little time. First, you need to start the instrument panel, then press the buttons simultaneously on the panel, at this point the time will start flashing. Now you can adjust the time using the button on the right side of the panel, turning it right or left. Once the time is adjusted, confirm by pressing the button, then adjust the minutes and confirm again by pressing the button. At this point, the procedure will be complete.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on the Maruti Vitara Brezza
How to Change the Time on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) Let's look at the guide below that will allow you to change the time displayed on the small screen of the instrument cluster on the Maruti Vitara Bre…
How do you set the clock of the Maruti Vitara Brezza?
How do you set the clock of the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The clock that appears on the instrument panel of the Maruti Vitara Brezza can be adjusted by turning on the instrument panel, so that it is possible…
How do you adjust the clock in the Maruti Vitara Brezza VDI?
How do you adjust the clock in the Maruti Vitara Brezza VDI?
Maruti Vitara Brezza (2016-2023 / MK 1) One of the reasons that could reset the clock of a car is disconnecting the power cables of the battery. In addition to this, there is also the switc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos