Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Under-Windscreen Area of a Maruti Celerio

Model: Suzuki Maruti Celerio MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

This video is currently unavailable

Restore the under-windscreen panel on a Maruti Celerio. First, remove it from its position for easier handling; it is not difficult as it is clipped in place.

Also, remove the wipers for safety to avoid damaging them. In the video, the work is done right above the engine, but it is better to do it on another surface.

Spray it with a degreaser, then use a brush and wash it with water to remove all dirt deposits, both underneath and on top. Allow it to dry, and with the same brush, try to remove dirt residues from the area where the panel was fitted. Once everything is dry, apply double-sided tape and refit the panel in place.

Reposition the wipers. The job is complete.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Maruti Celerio?
How to Remove the Air Filter on a Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) In this tutorial, see how to remove the air filter on a Maruti Celerio. This operation is very simple and quick, to be done when you need to clean or…
How to replace the front bumper on the Maruti Celerio?
How to replace the front bumper on the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) To replace the front bumper on the Maruti Celerio, open the bonnet to access the screws and rivets that secure the bumper at the front. Once these fa…
Where is the Spare Wheel on the Maruti Celerio?
Where is the Spare Wheel on the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) The spare wheel on the Maruti Celerio is located inside the boot of the vehicle. To access the spare wheel, open the tailgate and lift the carpet at …

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos