Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Wrap the Dashboard on a Maruti 800?

Model: Maruti 800 MK 1 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Accessory kit

Video tutorial

Wrapping allows you to customize the interior of your car and make it more aligned with your taste and personality. It is simple to do and only requires a utility knife and a squeegee (or a card), along with the appropriate adhesive material.

Clean the dashboard of the car and apply the pre-cut adhesive strip according to the size you need. Use the utility knife to trim any excess, shaping it as needed, and with the squeegee or card, remove air bubbles and finish the edges.

Done. In just a few steps, you have refreshed the look of your car.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Where is the OBD port located in the Maruti 800?
Where is the OBD port located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The OBD2 port or diagnostic socket on a Maruti 800 vehicle is located inside the cabin, specifically under the steering wheel near the fuse box. Unli…
How to Install Roof Railing on the Maruti 800
How to Install Roof Railing on the Maruti 800
Maruti 800 (1984-2014 / MK 1) In this brief guide, you will learn the main instructions on how to install roof railing on the Maruti 800. First, obtain the appropriate roof railin…
Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dash…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos